AMD Radeon R9 270X User Manual

Table 4–2 Sample Display Configurations
Sample Display
Configuration
DVI-I
Connector
mDP
Connector
mDP
Connector
HDMI
Connector
Total
Output
6×mDP - Native (×6) - - 6
DVI, 2×mDP, 2×mDP Native Native (×2) Native (×2) - 5
2×mDP, VGA, HDMI - Native (×2) mDP to VGA (A) Native 4
DVI, 2×mDP, HDMI - mDP to DVI (A) Native (×2) Native 4
DVI, HDMI, mDP,
HDMI
Native mDP to DVI (A) Native Native 4
DVI, mDP, mDP Native Native Native - 3
DVI, DVI, VGA Native mDP to DVI (A) mDP to VGA (A) - 3
For additional configuration information, visit http://www.amd.com/eyefinity.
Once displays are connected to the graphics card, you can change how your displays
are configured using the Control Center software application. For more information,
see Chapter 6 Using the Control Center Software (p. 19).
4.3 Using Adapters
The following procedure describes how to connect a display to your graphics card
using an adapter.
1. Turn off your computer and display.
2. Plug the adapter into the connection from your AMD Radeon graphics card and
tighten the thumbscrews (if there are any).
3. Connect your display's cable to the adapter and tighten the thumbscrews (if
there are any).
4. Turn on your display first, then your computer.
Use the Control Center software application to configure the new display.
4.4 Configuring the Display (Optional)
To change the display configuration or if you are experiencing an issue with the
display, do the following:
Note: If you are not experiencing any troubles with the display, no adjustments are
necessary.
1. Right-click on the desktop and, in the shortcut that appears, click Properties.
The Display Properties dialog appears.
2. Click the Settings tab and then select the screen resolution and color depth that
best suit your requirements and the display’s performance.
3. Click Advanced and then select the Monitor tab.
Display Configuration 13
© 2014 Advanced Micro Devices, Inc. AMD Radeon™ R9 270X/R9 270 Graphics

AMD Radeon R9 270X Specifications

General

Architecture	GCN 1.0
Stream Processors	1280
Core Clock	1000 MHz
Boost Clock	1050 MHz
Memory Type	GDDR5
Memory Bus	256-bit
TDP	180 W
GPU	Curacao XT
Process Size	28 nm
Transistors	2.8 Billion
Memory Clock	1400 MHz
Memory Bandwidth	179.2 GB/s
Compute Units	20
Texture Units	80
ROPs	32
DirectX	11.2
OpenCL	1.2
PCIe Version	3.0
Display Outputs	2x DVI, 1x HDMI, 1x DisplayPort
Memory Size	2 GB
Outputs	DVI, HDMI, DisplayPort