Ameda Purely Yours - Ameda One-Hand Manual Breast Pump; Set Up; Before First Use; After Every Use

10
ENGLISH
Ameda One-Hand Manual Breast Pump
Note: One-Hand Handle Assembly included with some versions. Also sold separately.
Set Up
ALWAYS WASH HANDS WELL WITH SOAP AND WATER BEFORE PUMPING.
Before First Use
IfyourOne-HandManualBreastPumpismarked“STERILE,”open
and use.
IfyourOne-HandManualBreastPumpisNOTmarked“STERILE,”before
rstuse:
• Boilallpartsfor20minutes.
• Removeallpartsfromwaterrightafterboiling.
• Allowpartstoairdrybeforeassemblyanduse.
After Every Use
Largeplasticpieces(breastanges,handle,andbottles)canbewashedontheupperrack
ofastandardhouseholddishwasher.Washpiston,pistonsealandwhitevalvegentlybyhand.
Do not insert anything into white valve while cleaning.
1.TakeapartOne-
HandManual
BreastPump.
Unscrew bottle
frombreastange.
2. Slide handle bottom
offbreastange.
3.Removepiston
from upper
chamber.
4.Pushdown
on handle to
release piston.
5.Peeloffpistonseal
from piston.
6.Pulloffwhitevalve
frombreastange.
Note: Grasp white
valve gently by
thick sides, not
by thin edge to
prevent damage.
7.Rinseanymilk
residue from pump
parts with cool
water.
Wash all parts
in warm, soapy
water.
 Rinsewellinwarm,
clean water.
8.Allowpartsto
air dry on clean
surface.