Ameda Purely Yours - Assembly

7
ENGLISH
Assembly
1. Insert diaphragm into upper chamber
ofbreastange.
2. Snap adapter cap with tubing onto the top
of upper chamber.
3.Gentlypushwhitevalvermlyontoringon
undersideofbreastange.
4.Screwbottleontobreastange.
5.Pushtubingadapteratendoftubingintotubing
adapter port on pump.
Single and Dual Pumping
The kit can be used to single or dual pump.
Insert the tubing adapter into the tubing adapter port of the pump.
To Begin Pumping
• Centernipple(s)inbreastange(s).
• Fillbreastange(s)withthebreast(s)tocreateanairseal.
Starting Pump
• Choosepoweroption,andconnectpumptopowersource.
• TurnSUCTIONdialtotherightuntillightturnson.Pumpisnowon.
Turn dials to the right (clockwise) to
increasepumpsettings(fasterSPEED,
strongerSUCTION).Turndialstotheleft
(counter-clockwise)todecreasepump
settings(slowerSPEED,gentlerSUCTION).
2
1
3
4
5
To single pump:
Removeonetube
and close tubing
adapter.
To dual pump:
Bothtubesshould
be attached to
tubing adapter.
Suction
Speed
Dual pumping
with one hand
gives you a free
hand for other
things.