Ameda Purely Yours - Assembly: One-Hand Manual Pump

11
ENGLISH
1. Unsnap and
removeadapter
cap.
2.Removediaphragm
from upper
chamber of
breastange.
3. Fit piston seal onto
base of piston.
4.Pushcenterof
handle down and
snap top of piston
intogrooveon
handle.
5.Pushpistoninto
upper chamber
ofbreastange.
Assembly
Converting from Electric Pumping to Manual Pumping
6.Pullhandledown
and snap handle
collar around
grooveof
breastange.
(See shaded area
in diagram above.)
7. Gently push white
valvermlyonto
ring on underside
ofbreastange.
8. Screw breast
angeontobottle.
Handle is on
correctly if top
of handle is a
straight line.