EasyManua.ls Logo

American Standard YCZ060F1 User Manual

American Standard YCZ060F1
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
All phases of this installation must comply with the NATIONAL, STATE & LOCAL CODES. In the absence of local codes, the
installation must conform with National Electric Code -- ANSI/NFPA 70 or "LATEST REVISION."
Since the manufacturer has a policy of continuous
product improvement, it reserves the right to change
specifications and design without notice.
© American Standard Inc. 1999
HAZARDOUS VOLTAGE - DISCONNECT POWER BEFORE SERVICING
WARNING:
INSTALLATION
OPERATION
MAINTENANCE
ALL phases of this installation must comply with
NATIONAL, STATE AND LOCAL CODES
IMPORTANT — This Document is customer property and is to remain with this unit. Please return to service information pack upon completion of work.
Single Package Two Stage
Gas/Electric 16 SEER
Convertible 3 & 5 Ton
Model:
YCZ036F1/3M0B
YCZ060F1/3M0B
BAYLIFT002A
LIFTING LUG KIT
18-EB21D4-2
Library
Product Section
Product
Model
Literature Type
Sequence
Date
File No.
Supercedes
Service Literature
Unitary
Packaged Gas/Electric
YCZ
Installation, Operation, Maintenance
1A
July 1999
SV-UN-RT-YCZ-IOM-1A 7/99
YCZ-IOM-1
YCZ-IOM-1A
Question and Answer IconNeed help?

Do you have a question about the American Standard YCZ060F1 and is the answer not in the manual?

American Standard YCZ060F1 Specifications

General IconGeneral
Model NumberYCZ060F1
BrandAmerican Standard
CategoryFurnace
TypeGas
Efficiency80% AFUE
Input BTU60, 000
Output BTU48, 000
Blower MotorMulti-speed
StagesSingle Stage
Ignition TypeHot Surface Ignition
Warranty10-year limited warranty on heat exchanger, 5-year limited warranty on parts

Summary

GENERAL INFORMATION

Safety and Precautions

Essential safety warnings, precautionary measures, and first aid for unit operation.

DIMENSIONAL DATA

Unit Outline and Service Clearances

Diagrams showing unit dimensions, weight, and required service clearances.

INSTALLATION TYPES AND CONVERSIONS

Rooftop Installation Examples

Visual examples of typical rooftop installations with different curb types.

Airflow Orientation Conversion

Instructions for converting the unit's airflow from horizontal to downflow.

LOCATION AND CLEARANCE GUIDELINES

Unit Placement and Airflow

Recommendations for unit placement, airflow, and curb mounting.

Clearance Requirements for Operation

Specifies minimum clearances needed for unit placement and efficiency.

INSTALLATION PROCEDURES

Rigging, Lifting, and Unit Placement

Procedures for safely lifting, positioning, and securing the unit on site.

GROUND LEVEL INSTALLATION

DUCTWORK

Duct Attachment Methods

Techniques and recommendations for attaching ductwork to the unit.

GAS PIPING INSTALLATION

Gas Supply and Pressure Requirements

Guidelines for gas piping, supply pressure, and critical safety measures.

GAS SYSTEM COMPONENTS

Burner and Valve Illustration

Visual representation of the gas valve and burner components.

Flue and Hood Illustration

Visual representation of the flue duct and inlet hood assembly.

GAS INPUT AND HIGH ALTITUDE ADJUSTMENTS

Gas Input Check and Adjustment

Procedures for checking and adjusting the unit's gas input rate.

High Altitude Installation Considerations

Specific instructions for installing and adjusting the unit at high altitudes.

ELECTRICAL AND FILTER INSTALLATION

Air Filter Installation

Guidelines for installing air filters in the unit or ductwork.

Electrical Wiring and Safety

Requirements for electrical connections, power supply, grounding, and safety devices.

FIELD WIRING DIAGRAM

START-UP PROCEDURES

Pre-Start Checks and Cooling Cycle

Essential pre-start checks and procedures for initiating the cooling cycle.

Heating Cycle Start-up

Step-by-step guide to starting the unit in heating mode.

SEQUENCE OF OPERATION

Heating Cycle Operation Details

Detailed explanation of the unit's operation during heating cycles.

Cooling Cycle Operation Details

Detailed explanation of the unit's operation during cooling cycles.

FAN CONTROL AND ADJUSTMENTS

Fan Speed and Timing Settings

Settings for fan speed control and indoor blower timing.

TROUBLESHOOTING AND DIAGNOSTICS

Diagnostic Indicators and Troubleshooting Chart

Guide to understanding diagnostic codes and resolving system faults.

MAINTENANCE PROCEDURES

Owner Maintenance Tasks

Periodic maintenance tasks for the owner, including filter and coil care.

Serviceman Maintenance and Flue Cleaning

Annual service checks and flue cleaning procedures by a qualified technician.

LIMITED WARRANTY

Warranty Terms and Conditions

Terms and conditions of the warranty for residential and commercial applications.

Related product manuals