PREFACE P-3
Safety Requirements
READ BEFORE ATTEMPTING OPERATION OF INSTRUMENT
The Chandler Engineering Flow-Thru Viscometer is designed for operator safety. However,
the instrument should be handled by personnel that have the appropriate safety training.
To ensure safety:
• Use appropriate Personal Protective Equipment such as safety glasses, latex gloves, etc.
• Use proper lifting techniques when moving instrument.
• Read and understand instructions before attempting instrument operation.
• Observe caution notes!
• Observe and follow the warning labels on the instrument.
• Never exceed the instrument maximum pressure and temperature ratings.
• Always disconnect main power to the instrument before attempting any repair.
Before attempting to operate the instrument, the operator should read and understand
this manual.
Where to Find Help
In the event of problems, contact your local sales representative or Chandler Engineering:
• Telephone: 918-250-7200
• Fax: 918-459-0165
• E-mail: sales@chandlereng.com
• Website: www.chandlereng.com
Instrument training classes are also available.
To Next Page
Loading...
