INDEX
INDEX-5
Relock External Reference control 5-7, 5-62, 5-81
REMOTE [n] command 6-35, E-19
Remote indicator 5-5
RS [n
1
[n
2
]] command 6-33, E-19
RS232 interface
address control 5-32
AUX RS232 connector 4-7
auxiliary RS232 interface - described 6-3
auxiliary RS232 interface address 5-32
baud rate control 5-32
character echo control 5-32
choice of baud rate 6-2
choice of number of data bits 6-3
choice of parity check option 6-3
connector 4-7
general features 6-2
handshaking and echoes 6-3
N (overload) command 6-4
number of data bits control 5-32
parity control 5-33
prompt character control 5-33
prompts 6-4
ST (status) command 6-4
terminators 6-4
RS232 Operation 6-1
RS232 Settings Menu 5-31
RSADDR [n] command 6-34, E-19
RT[.] command 6-18, E-19
SELECT CONTROL Key 4-5
SEN [n] command 6-11, E-19
SEN. command 6-11, E-19
Sensitivity 1 control 5-80
Sensitivity 2 control 5-80
Sensitivity control 5-6, 5-62
SIG MON connector 4-8
Signal channel inputs 3-3
Signal Channel Menu 1 5-8
current input mode 5-9
voltage input mode 5-9
Signal phase 3-12
Single Graph Menu 5-46
Single harmonic mode
described 3-1
Single reference mode
Auto Functions Menu 5-26
Configuration Menu 1 5-29
described 3-1, 5-8
Main Display 5-3
menu descriptions 5-3
output display choices 5-5
Output Equations Menu 5-16
Output Filters Menu 5-14
Output Offset & Expand Menu 5-15
Reference Channel Menu 5-12
Signal Channel Menu 2 5-10
SLOPE [n] command 6-16, E-20
Specifications
detailed listing of A-1
for analog outputs A-4
for auxiliary inputs A-4
for computer interfaces A-5
for data storage buffer A-5
for demodulators and output processing A-3
for display A-1
for internal oscillator A-3
for measurement modes A-1
for reference channel A-3
for reference input A-2
for signal channel A-2
weight and dimensions A-5
Spectral display 3-15
Spectral Display Menu 5-38
SRATE[.] [n] command 6-22, E-21
ST command 6-34, E-21
STR [n] command 6-28, E-21
SWEEP [n] command 6-22, E-21
SYNC [n] command 6-16, E-22
SYNCOSC [n] command 6-21, E-22
TADC [n] command 6-26, E-22
Tandem demodulation mode
described 3-1
TC [n] command 6-16, E-22
TC. command 6-16, E-22
TD command 6-28, E-23
TDC n command 6-29, E-23
TDT n command 6-28, E-24
Terminators 6-4
Time constant control 5-7, 5-62, 5-80
TRIG IN connector 4-8
TRIG OUT connector 4-8
TRIGOUT [n] command 6-29, E-24
TRIGOUTPOL [n] command 6-29, E-24
TTL REF IN connector 4-7
Typical Lock-in Amplifier Experiment 5-90
USB connector 4-6
USB interface
Connection speed display 5-36
general features 6-6
Manufacturer descriptor 5-35
Output terminator control 5-36
Overload byte 6-6
Product descriptor 5-35
To Next Page
Loading...