Chapter 5, FRONT PANEL OPERATION
5-30
instrument's operating firmware. The firmware in the instrument can be updated to
the latest version by connecting it to a PC via the RS232 or USB interfaces and
running an Update program.
Options
This key gives access to the Options Menu, which is used to install firmware options
within the instrument. It is discussed later in section 5.3.21
Configuration 2
This key gives access to the Configuration Menu 2, discussed later in section 5.3.22
Turn display off
Pressing this key turns off the display panel. Press any key to turn it back on.
Pressing the Previous Menu key returns control to the Main Menu 1
The Virtual Reference, Dual Reference, and Dual Harmonic modes are discussed
later in sections 5.4, 5.5 and 5.6 respectively.
5.3.16 Communications Menu
When the Configuration Menu 1 is displayed, pressing the Communications key
accesses the Communications Menu, shown in figure 5-21.
Figure 5-21, Communications Menu
The Communications menu has keys to access four sub-menus. The elapsed time
indicator in the bottom right hand corner reports the total time for which the
instrument has been powered up.
Pressing the Previous Menu key returns control to the Configuration Menu 1.
5.3.17 RS232 Settings Menu
When the Communications menu is displayed, pressing the RS232 Settings key
accesses the RS232 Settings menu, which is shown in figure 5-22.
To Next Page
Loading...