Need help?Do you have a question about the Ametek 7230 and is the answer not in the manual?
General| Bandwidth | DC - 1 MHz |
|---|---|
| Gain | 0 - 80dB |
| Output Voltage | ±140V |
| Input Impedance | 1 MΩ |
| Power Supply | ±15 V |
Explains the meaning of safety symbols used in the manual.
Lists conditions under which the equipment may be unsafe.
Guides users on navigating and understanding the manual's structure.
Explains the fundamental principles and applications of lock-in amplifiers.
Details the technical specifications and advantages of the Model 7230.
Provides straightforward instructions for setting up the instrument.
Outlines a procedure to verify the instrument's functionality upon receipt.
Defines and explains various operational modes of the lock-in amplifier.
Describes the instrument's design through functional blocks and their operation.
Details the configuration options for signal input connectors and modes.
Explains AC gain parameters and their impact on dynamic reserve.
Details the features and accuracy of the instrument's internal oscillator.
Describes the layout and function of the instrument's front panel components.
Details the connectors and controls located on the instrument's rear panel.
Explains different methods for connecting the instrument to a network.
Describes the instrument's interface accessed through a web browser.
Details the controls affecting the instrument's signal channel input.
Explains the controls for the first reference channel.
Details the controls affecting the first set of demodulator outputs.
Details how to operate the instrument using the RS232 interface.
Explains how to operate the instrument using the USB interface.
Describes operating the instrument via the Ethernet interface.
Lists and explains commands for controlling the instrument.
Lists and describes the different measurement modes available.
Details the specifications for the instrument's signal channel.
Shows the pinout configuration for the RS232 connector.
Details the pinout and configuration of the digital I/O port.
Lists the default settings applied by the Auto Default function.
Controls the AC gain of the signal channel amplifier.
Performs an auto-default operation to reset instrument settings.
Controls the full-scale sensitivity.
To Next Page
