16
PARSTAT 2273 Hardware User’s Manual
6. Other configurations and connections — If your cell is a two-terminal connection (i.e., a
battery or resistor) connect both the green (working) and gray (sense) leads to either the
anode or cathode, and both the red (counter) and white (reference) leads to the remaining
cathode/anode.
There are some applications for which a four-electrode configuration is required. In this case,
the sense electrode serves as a second reference electrode, useful for controlling the
potential between the reference and sense (for instance, in controlling the potential across a
membrane in an H-cell setup).
7. After all other connections to the PARSTAT 2273 are completed, you can turn on power to the
instrument.
To Next Page
Loading...
