Ametek Sorensen XG 100-8.5 User Manual

PROGRAMMABLE POWER
M370430-01 Rev F www.programmablepower.com
XG Family Programmable DC
Power Supply
Operating Manual
(firmware v 2.0 and higher)
670 Watts – 1700 Watts
Half Rack
Full Rack
6 V to 600 V Models:
6-110
6-220
6-220
8-100
8-187.5
8-200
12-70
12.5-120
12-140
20-42
20-76
20-84
33-25
30-50
33-50
40-21
40-38
40-42
60-14
60-25
60-28
80-10.5
80-19
80-21
100-8.5
100-15
100-17
150-5.6
150-10
150-11.2
300-2.8
300-5
300-5.6
600-1.4
600-2.6
600-2.8

Ametek Sorensen XG 100-8.5 Specifications

General

Brand	Ametek
Model	Sorensen XG 100-8.5
Category	Power Supply
Language	English

Summary

Warranty and Product Return

Warranty Terms and Conditions

2 Installation

Basic Setup Procedure Steps

Step 3: AC Input Power Connection

Step 5: Performing Functional Tests

3 Local Operation

Front Panel Controls and Settings

Menu System Navigation

Operating Modes Explained (CV, CC, CP)

Output Enable and Auxiliary Output Control

Auto Start and Protection Features

Covers auto start modes and general protection features like foldback and OVP.

Alarms and Errors Management

Explains how alarms are triggered, displayed, and cleared, including error handling.

Protection Mechanisms (Foldback, OVP, UVP, OTP)

Details the configuration and usage of various protection mechanisms like Foldback and OVP.

External Shutdown and Interlock Functions

Multiple Power Supply Configuration

4 Analog Programming (APG) and ISOL

APG Voltage and Current Control Methods

Explains voltage and current control using external voltage or resistive sources.

APG Connector J1 Pinout and Functions

5 Remote Operation

Hardware and Connection Setup

Remote Control Interface Configuration (RS-232, RS-485, USB)

Optional Interfaces (GPIB, Ethernet/LAN)

Terminal Configuration and Software Setup

Communication Port Selection and Addressing

SCPI Status Reporting Overview

Introduces SCPI standard status reporting mechanisms and registers.

Status Registers (Byte, Operation, Standard Event)

Details the Status Byte, Operation, and Standard Event Status Registers.

Questionable, Voltage, Temperature Status Registers

Explains the function and bits of Questionable, Voltage, and Temperature status registers.

SCPI Register Commands

Lists SCPI commands for managing Operation, Shutdown, and Protection status registers.

Protection Mechanism Configuration (Masking, Latching)

Details how to configure protection masks and alarm output latching.

Auto Sequence Programming Features

Covers storing, loading, running, and managing auto sequence programs.

User Settings Save/Recall via Commands

Analog Programming Level Configuration

Details setting the input range for analog programming levels.

Remote Programming Interface Selection

Explains how to select the remote source for analog programming.

6 Communications Options

LAN Connection and Configuration Methods

Explains different LAN connection types and configuration steps.

LAN Configuration Tools (Discovery Browser, EnetTest)

LAN Parameter Settings

IP Address Configuration

Instructions for setting static or DHCP IP addresses for LAN connectivity.

MAC Address and Gateway Configuration

Static IP Address Configuration Steps

Provides step-by-step guides for setting static IP addresses via Ethernet, USB, Serial.

Communication Software Setup (NI MAX)

Guides on installing and configuring National Instruments MAX for serial communication.

7 Calibration and Troubleshooting

Output Voltage and Current Calibration

Details procedures for calibrating output voltage and current, including gain and offset.

Analog Programming Calibration Procedures

Covers calibration for non-isolated and isolated analog programming modes.

Restore Calibration Settings

User Diagnostics and Troubleshooting Guide

Provides guidance for operator-level troubleshooting of common issues.

Emergency Shutdown and Erratic Operation Procedures