Ametek Sorensen XG 100-8.5 - Page 312

A-20 M370430-01 Rev F
APPENDIX A SCPI Command Reference
Table A-4 SCPI Commands for Calibration (Continued)
Calibrate the
Voltage
controlled Non
Isolated
Current APG
feature
[:]CALibration[<channel>]:OUTPut :ANAL
og:CURRent
Calibrate the current analog
programming system.
? | <NR1> | <nothing
for interactive mode>
Yes
Calibrate the
Voltage
controlled
Isolated
Current APG
feature
[:]CALibration[<channel>]:OUTPut :ANAL
og:CURRent:ISOLated
Calibrates the current analog
programming system.
? | <NR1> | <nothing
for interactive mode>
Yes
Calibrate the
Resistive
controlled Non
Isolated
Voltage APG
feature
[:]CALibration[<channel>]:OUTPut :ANAL
og[:VOLTage]:RESistive
Calibrate the Resistive
controlled voltage analog
programming system.
? | <NR1> | <nothing
for interactive mode>
Yes
Calibrate the
Resistive
controlled
Isolated
Voltage APG
feature
[:]CALibration[<channel>]:OUTPut :ANAL
og[:VOLTage] :RESistive:ISOLated
Calibrates the Resistive
controlled voltage analog
programming system.
? | <NR1> | <nothing
for interactive mode>
Yes
Calibrate the
Resistive
controlled Non
Isolated
Current APG
feature
[:]CALibration[<channel>]:OUTPut :ANAL
og:CURRent:RESistive
Calibrate the Resistive
controlled current analog
programming system.
? | <NR1> | <nothing
for interactive mode>
Yes