Communications Options
6-8 M370430-01 Rev F
CONNECTING TO A NETWORK
There are two basic situations to deal with in communicating with
the power supply from a PC. They depend on whether or not the
PC is on the same side of a router as the power supply.
Connecting with PC on Same Side of Router as Power Supply
PC
IP Address: 192.168.1.100
Gateway Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Router
IP Address: 192.168.1.1
Network
Power Supply
IP Address: 192.168.1.101
Gateway Address: 192.168.1.1
Subnet Mask: 255.255.255.0
WAN Address: 10.11.27.86
Figure 6-7 PC on Same Side of Router as Power Supply
The simplest case is when they are both on the same side as in
Figure 6-7. In this example the router has assigned addresses to the
power supply (192.168.1.101) and to the PC (192.168.1.100) using
DHCP. To connect to the power supply by a Web browser, simply
enter the power supply’s router-assigned address of
“192.168.1.101” into the Web browser’s address bar. This will
open up the power supply’s Home page. It should appear similar
to Figure 6-8.
Please note that the Web page may require Java to be installed
on the Web browser for it to display properly. Java can be
installed from the Java website.
To Next Page
Loading...