Ametek Sorensen XG 20-76 - Page 311

M370430-01 Rev F A-19
A
APPENDIX A SCPI Command Reference
Table A-4 SCPI Commands for Calibration (Continued)
Calibrate the
Voltage
controlled Non
Isolated
Current APG
feature
[:]CALibration[<channel>]:MONitor :CUR
Rent
Calibrate the current monitor
signal system.
? | <NR1> | <nothing
for interactive mode>
Yes
Calibrate the
Voltage
controlled
Isolated
Current APG
feature
[:]CALibration[<channel>]:MONitor :CUR
Rent:ISOLated
Calibrate the isolated current
monitor signal system.
? | <NR1> | <nothing
for interactive mode>
Yes
Calibrate the
Voltage APG
Input
[:]CALibration:INPut :ANALog[:VOLTage]
Calibrates the isolated and
non-isolated VA P
measurement commands.
<?|NR1>
Yes
Calibrate the
Current APG
Input
[:]CALibration:INPut :ANALog:CURRent
Calibrates the isolated and
non-isolated CAP
measurement commands.
<?|NR1>
Yes
Calibrate the
Voltage
controlled Non
Isolated
Voltage APG
feature
[:]CALibration[<channel>]:OUTPut :ANAL
og[:VOLTage]
Calibrate the voltage analog
programming system.
? | <NR1> | <nothing
for interactive mode>
Yes
Calibrate the
Voltage
controlled
Isolated
Voltage APG
feature
[:]CALibration[<channel>]:OUTPut :ANAL
og[:VOLTage]:ISOLated
Calibrates the voltage analog
programming system.
? | <NR1> | <nothing
for interactive mode>
Yes