Ametek Sorensen XG 20-76 - Page 398

Index
Index-2 M370430-01 Rev F
G
gain calibration, effect of 6–6
gain error, described 6–3
I
IEEE
GPIB cable 5–15
Std. 488.1 1987 A–2
Std. 488.1999 2 17.1.2 5–52
Std. 488.2 1992 A–2
Std. 488.2 1999 12.5.2 5–52
Std. 488.2 1999 12.5.3 5–52
Std. 488.2 Register Model 5–27
Std. 488.2 registers 5–27
Std. 488.2 syntax error 5–33
inactivity timeout
default 3–7
described 3–7
L
local lockout, described 3–12
local operation
coarse adjustment mode 3–3
fine adjustment mode 3–3
M
menu system
navigating 3–2, 3–5
select and set model procedure 3–5
setting VOL and CUR modes 3–5
N
Normal display mode, described 3–7
O
offset calibration, effect of 6–6
offset error, described 6–3
P
parameter types A–7
boolean A–7
discrete A–7
numeric A–7
string A–7
parameters, units of measure and multipliers
A–2
S
SCPI A–4
command hierarchy A–3
command structure A–3
command summary A–14
command tree A–8
common commands A–6
conformance information A–2
described A–3
minimum and maximum A–6
parameter types A–7
requirements A–2
terminating characters A–6
using queries A–5
select and set mode, described 3–5
standard operation, described 3–12
T
TIA/EIA-232 F A–2
tracking mode, described 3–5
U
user setting memory locations 1–2
described 3–7, 3–16
number available 3–36
stored values 3–36