M O D E L 2 1
O P E R A T
I O N M A N U A L
ii
iiii
ii
NOTICE
T
his document and the information contained herein is the property of Arc Machines, Inc... It is proprietary and submitted
and received in confidence. It shall be used only for the purpose for which it is submitted and shall not be copied in
whole or in part without the prior expressed written permission of Arc Machines, Inc.
The information in this document has been carefully reviewed and is believed to be accurate.
Information and instructions in this document are subject to change and Arc Machines, Inc. reserves the right to change
specifications and data without notice.
WARNING
The na
ture of the GTAW process creates some POTENTIAL HAZARDS. In accordance with international safety
regulations the EXCLAMATION SYMBOL indicates that this equipment is considered HAZARDOUS until an operator has
been made aware of these POTENTIAL HAZARDS by reading the appropriate Arc Machines, Inc. Power Supply and/or
Weld Head Operation Manual. The LIGHTNING FLASH SYMBOL indicates that there are potential electrical hazards.
The use and display of these symbols make it the OPERATOR’S RESPONSIBILITY TO INSURE THAT HE HAS READ
AND/OR BEEN MADE AWARE OF ALL OF THE SAFETY-RELATED ITEMS CONTAINED IN THESE MANUALS.
Publica
tion Date : 4-15- 2011
Copyright 2011 by Arc Machines, Inc.
All rights reserved
Revision History
Revision ECO No. Change Description Date Appr.
- N/A Initia
l release 4/15/11 PP
A 6052 Updated select text and images 7/7/11 PP
To Next Page
Loading...