Amica KMC User Manual

18
OPERATION
If timer function is activated when no cooking zone is in operation, no LED pilot light comes on by the
timer display (9) and this function can be then used as a regular kitchen timer.
Kitchen Timer
Kitchen timer can be used to time various duties requiring precise timing such as boiling eggs, or to time
other activities that are not directly associated with the appliance operation. Timer can be set from 0 to
99 minutes.
To set kitchen timer:
• touch timer sensor eld (8) once,
• then set the time (eg 5 minutes) by sliding your nger across the setting selection sensor eld
(4).
When the set time has elapsed, a brief acoustic signal is sounded repeate-
dly.
When the set time has elapsed, a brief acoustic signal is sounded repeatedly. The
relevant cooking zone display (3) will show „0” indicating the zone is switched off
and timer display (9) will show „00”.
To change the heat setting of a cooking zone with an activated timer, select the desired
cooking zone using the cooking zone selector sensor eld (2), and then set the desired heat
setting by sliding your nger across the heat setting selection sensor eld (4).
Timer
If the appliance is equipped with a timer, it
can be used to set the operating time of any
cooking zone.
Select the desired cooking zone using the
cooking zone selector sensor eld (2) and then
touch the timer sensor led (8) as many times
as necessary until a pilot light (10) comes on
indicating the desired cooking zone (2).
Then, while the pilot light (10) is ashing, slide
your nger across the setting selection sensor
eld (4) to set the desired operating time for the
selected cooking zone.
Timer will only start counting down when timer
display (9) shows a value higher than zero.
2
4
8
2
2
3
3
3
3
9
10
10

Amica KMC Specifications

General

Brand	Amica
Model	KMC
Category	Hob
Language	English