23
EMERGENCY PROCEDURE
PROBLEM CAUSE ACTION
7.Residual temperature in di-
ca tor is not lighted although
the hot pla tes are still hot
- power supply fa ilu re, the
ap plian ce has been di scon-
nec ted from the mains
-the residual temperature in-
di ca tor will work again after
swit ching the control panel
on and off.
8. Crack in the ceramic
plate
Danger! Immediately disconnect the ceramic plate
from the mains (fuse) and call the nearest Cus-
tomer Service Centre.
9. If the fault still remains Disconnect the ceramic plate from the mains (fuse)
and call the nearest Customer Service Centre.
Important!
You are the person responsible for proper condition and
operation of the appliance in your household. If you call
the Service for a fault which resulted from improper opera-
tion, you will be charged with the costs of the visit even
during the period of warranty. We shall not be held liable
for damages caused by a failure to observe this Manual.
To Next Page
Loading...
Need help?
General
