• Set the ac cel er a tor le ver (3) to «MIN».
• Move en gine switch (4) to «ON».
• Pull starter han dle (5) slightly un til re sis tance is felt, then pull
out sharply.
74020000-2 HbmG gnu thci dreV nna mmA 7102/90
3. Ope ra ti on
41
Do not al low starter han dle to re bound against the en -
gine. Guide starter ca ble back by hand to re set po si -
tion.
If the mo tor does n't start, set the ac cel er a tor le ver
about 1/3 of the way to «MAX».
To Next Page
Loading...
