4.2.2 Load ing and trans por ta tion
• Use the cen tre-of-grav ity sus pen sion point (2) in or der to lift
the ma chine.
Weights: See tech ni cal data.
• Af ter be ing loaded on to the means of trans por ta tion, the ma -
chine should be lashed in place.
74020000-2 HbmG gnu thci dreV nna mmA 7102/90
4. Trans port
49
In ju ry ha zard from over loa ding the bo dy!
Lift ing the de vice for trans port or change of lo ca -
tion can cause in jury (such as back in ju ries).
• Lift the ma chi ne with lif ting equip ment.
To Next Page
Loading...
