Ammann ARW 65 - Yanmar Engine Post-Start Actions; Yanmar Engine Shutdown

3.6.5 Af ter the en gine starts
• Set the RPM le ver (2) to idle «MIN».
• En gine in idle 1 ... Al low 2 min. to warm up.
3.6.6 Shut ting down the en gine
• Set the RPM le ver (2) to idle «MIN».
• Let the en gine run for about 5 min.
• Set the RPM le ver (2) to «STOP».
• Turn the fuel valve (1) to «S» (closed).
• Turn the ig ni tion key (3) to «0».
• Re move the ig ni tion key.
3. Op er a tion
58
1 – 2 min.
2
B6599502.cdr
STOP
2
B6599503.cdr
STOP
ca. 5 min .
2
B6599505.cdr
STOP
STOP
Important
If the en gine con tin ues run ning, close the fuel valve (1).
L 40_010.cdr
S
1
Danger
When work is over, or dur ing breaks, pro tect the
ig ni tion key from un au tho rized ac cess.