Ammann ARX 26-2 - Cleaning the Machine

163ARX 23-2 T4i, ARX 26-2 T4i
MAINTENANCE MANUAL
3.6.47 Cleaning the machine
Clean the machine from big impurities after completing the
work.
Clean the whole machine completely on regular basis, at least
once aweek.
Before cleaning with pressure water or steam, cover all
holes, into which the cleaning agent could penetrate
(e.g. intake opening of the engine). After completing the
cleaning, remove the end caps.
Do not direct the running water or steam at the electric
parts or insulation materials. Always cover such materi-
als (interior of the alternator, etc.).
Clean with the engine stopped.
Do not use aggressive or easily ignitable cleaning agents
(e.g. petrol and/or easily ammable substances).
Follow environmental standards and regulations when
cleaning the machine!
Clean the machine in aworkplace equipped with acatch-
ing system of cleaning agents to avoid contamination of
the soil and water resources!
Do not use forbidden cleaning agents!