Need help?Do you have a question about the Ampcontrol MEC-1 and is the answer not in the manual?
Explains warning and caution symbols for safety risks and important information.
Explains note for supplementary info and environmental alerts.
States document ownership and limits liability for information provided.
Recommends reading the manual for familiarization and correct operation.
Covers safe use, equipment knowledge, manual handling, and preventing modifications.
Emphasizes qualified personnel for installation and periodic testing for operation.
Check items against packing list, notify of damage/shortages.
Store indoors, protected. Take care when unpacking.
Dispose of packaging/waste responsibly, use recycling services.
Understand manual, application, and functionality for safe installation.
Modifications to the MEC-1 are prohibited and void warranty.
Adhere to practices like qualified personnel, correct standards, and record keeping.
Earth continuity protection relay for mining applications.
Lists features such as compact size, DIN rail mounting, and trip settings.
Details the enclosure and DIN rail mounting specifications.
Covers typical wiring diagram and terminal descriptions.
Specifies power supply and details optional reset, stop, start buttons.
Details relay contact ratings and external fuse recommendations.
Manual provides minimum tests for operation checking.
Verifies series and shunt resistance with specific test methods.
Verifies remote start functionality with relevant tests.
Explains the standard and its role in earth connection integrity.
Measures pilot-earth loop resistance; trips on high resistance.
Measures pilot-to-earth resistance; trips on low resistance.
How to enable and use remote start mode.
How latching mode works and prevents re-start until reset.
Step-by-step guide to manually reset the unit.
Configuration options for remote start, latching, trip level, and time.
Explains the meaning of Status, Healthy, Short Circuit, Open Circuit, and Timed Out LEDs.
Covers internal fault indication and the MEC-1 start-up sequence.
No internal servicing, but routine external checks are required.
No user-serviceable parts; return to Ampcontrol for repair.
Electronic equipment must not be treated as general waste.
Lists supply voltage, temperature range, contacts, protection, mechanical details.
Lists part numbers for the MEC-1 relay and accessories.
General| Brand | Ampcontrol |
|---|---|
| Model | MEC-1 |
| Category | Relays |
| Language | English |
To Next Page
