Need help?Do you have a question about the Amulet Hotkey DXT-H4 and is the answer not in the manual?
Details different DXT-H4 variants, including RJ45 and SFP network ports.
Information on Amulet Hotkey SFP modules for network connectivity.
Guidance on noting host and zero client IP/MAC addresses for setup.
Lists necessary cables for connecting the DXT-H4 and host.
Guidelines for maintaining optimal airflow and performance.
Steps for installing the optional mounting bracket for the DXT-H4.
Describes the buttons and LEDs on the front of the DXT-H4 unit.
Details the sockets, LEDs, and buttons on the rear of the DXT-H4.
Explains the meaning of various status LEDs on the front and rear panels.
Details the functions of the Power and Fn buttons on the DXT-H4.
Steps to prepare the host computer before installing the DXT-H4.
Instructions for connecting video, USB, and audio cables to the host PC.
Steps to connect the DXT-H4 to the network using the appropriate port.
Guide to changing the DXT-H4's default IP address for network configuration.
How to connect a zero client to the DXT-H4 using SLP Discovery.
Recommends and guides on changing the default password for security.
Explains the PCoIP protocol, its features, and benefits for remote desktop.
Details the function and types of PCoIP hosts, including the DXT-H4.
Describes PCoIP zero clients, their functionality, and data handling.
Outlines advantages like security, low maintenance, and cost savings.
Introduces tools like Management Console, AWI, and OSD for managing devices.
Instructions for powering on the zero client for the first time.
Explains various methods for establishing a PCoIP session.
Configuration for zero clients to automatically connect on user login.
How to properly disconnect from a host PC or virtual desktop session.
Discusses factors affecting bandwidth and provides estimates for PCoIP.
Explains how to choose and use a connection broker for managing PCoIP systems.
Explains the DXT-H4's dual IP addresses for Teradici and Management Interface.
Details the AWI and MI interfaces for managing the DXT-H4.
Instructions for logging into the AWI and MI.
Steps to check Teradici and Amulet Hotkey firmware versions.
Guides on updating Teradici firmware via AWI.
Information on disabling the Management Interface for security.
Steps for safely disconnecting and removing the DXT-H4.
Details the warranty period for the DXT-H4.
Lists technical details like form factor, processor, memory, cabling, video, audio, USB, network, and encryption.
Covers power consumption, cooling, weight, regulatory compliance, and temperature.
General| Brand | Amulet Hotkey |
|---|---|
| Model | DXT-H4 |
| Category | Extender |
| Language | English |
To Next Page
