ELECTRONIC MODULE DISPLAY
The electronic display on the eSpring™ Water Purifi er keeps track of actual
water usage gallons/litres and when the cartridge was installed. When
properly plugged into an electrical outlet, the water purifi er will display
its status via the electronic module LED display.
STATUS
WATER
DROPS
CUP
ICON
FILTER
ICON
LIFE
INDICATOR
BEEPER PHONE COMMENTS/ACTIONS
Normal display with
water fl ow
On/Blue Blue On/Blue On/Blue No Off Normal
Top Shroud removed
(Reseat for display)
On/Blue Off On/Blue On/Blue Repeated Off
Treated water fl ow – Cup icon On/Red –
Do not operate, replace Top Shroud
Cartridge not installed
On/Blue Off Off Off Repeated Off
Install Cartridge – Light On/Red
Cup icon On/Red
Lamp not lit
(lamp problem)
On/Blue Red On/Blue On/Blue Repeated Red
Phone icon On/Red;
Need replacement Cartridge
Early warning
On/Blue Blue On/Blue
Last
segment
fl ashing
Once at
fl ow start
Off 10% of life remaining
End of life
On/Blue Red
Flashing/
Blue
Off
Every 2
seconds
Off Replace Cartridge – Light On/Red
Water Purifi er
needs servicing
On/Blue Off Off Off Repeated Red
Cup icon On/Red
Phone Icon On/Red
Need new Electronic Module
Water Purifi er
malfunction
Flashing/
Blue
Flashing/
Blue
Flashing/
Blue
Flashing/
Blue
Constant
tone
Flashing/
Red
Phone icon On/Red
All other segments fl ashing
Unplug immediately
HOW TO READ THE ELECTRONIC MODULE DISPLAY
11
To Next Page
Loading...
