Need help?Do you have a question about the AMX AXB-REL8 and is the answer not in the manual?
General| Weight | 499 g |
|---|---|
| Dimensions (WxDxH) | 38 x 140 x 140 mm |
Overview of the physical layout and external components of the device.
Technical details including dimensions, power consumption, and included accessories.
Detailed explanation of front panel elements like LEDs, DIP switch, and connectors.
Details rear panel connectors such as AXlink and relay contacts.
Procedure for configuring the device number using the eight-position DIP switch.
Information on power and data connection needs for the AXlink bus.
Steps for preparing wires for connection to captive-wire connectors.
Guidelines for AXlink wiring distances based on wire gauge and power.
Details on connecting the AXlink data and power using the four-pin connector.
Instructions for using an external 12 VDC power supply for AXlink.
Steps to verify the AXlink wiring and connections after installation.
Instructions for connecting the device's eight relay outputs.
Procedures for testing the functionality of the installed device.
Steps for mounting the device in a rack using an accessory kit.
To Next Page
