Need help?Do you have a question about the AMX AXCENT3 AND AXCENT3 PRO INTEGRATED AXCESS SYSTEM and is the answer not in the manual?
General| IR/Serial Ports | 8 |
|---|---|
| Relay Ports | 8 |
| I/O Ports | 8 |
| Ethernet | 10/100 Mbps |
| Web Server | Yes |
| Operating Temperature | 32° to 104° F (0° to 40° C) |
| Humidity | 10% to 90% RH, non-condensing |
Details the physical dimensions, weight, power requirements, memory, enclosure, and port specifications of the controllers.
Details on connecting external devices, including preparing wires and using various connectors.
Steps for stripping wire insulation and securing wires into connectors correctly.
Pinout and configuration details for connecting serial communication devices.
How to connect devices using the AXlink connector for data and power.
Pinout and usage of the DB-9 PROGRAM connector for system programming.
Lists commands used via the PROGRAM port for device management and system operations.
Steps to establish PC communication and set the controller's device number in terminal emulator mode.
Procedure for acquiring and downloading firmware updates to the controller.
To Next Page