Need help?Do you have a question about the AMX AXB-VOL3 and is the answer not in the manual?
General| Type | Volume Controller |
|---|---|
| Channels | 3 |
| Power Supply | PoE (Power over Ethernet) |
| Product Type | Controller |
| Communication Technology | Wired |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Humidity | 10% to 90% non-condensing |
| Form Factor | Wall Mount |
Details the technical specifications for the AXB-VOL3, including line operation, input/output levels, and frequency response.
Details how to set the AXB-VOL3's AXlink device number using the DIP switch.
Instructions for stripping and inserting wires into connectors for proper connection.
Lists wire sizes and maximum allowable wiring lengths for the AXlink power.
Details the wiring configuration for the AXlink data/power bus connector.
Explains how to wire volume channels for unbalanced or balanced line operation.
Lists commands for controlling channel settings like ramp up, ramp down, and mute operations.
Defines the mapping of output levels 1, 2, and 3 to specific device outputs.
Details commands for sending volume ramp and level preset instructions to the device.
To Next Page
