AMX MCP-106 - Specifications; Mcp-106

Overview - Massio ControlPads
8
Instruction Manual - Massio ControlPads and Keypads
Specif ications
The following sections list the specifications for the Massio ControlPads.
MCP-106
The following table lists the specifications for the MCP-106:
MCP-106 Specifications
Ge n e r a l :
Dimensions (HWD): Portrait: 4 11/16" x 3 7/16" x 9/16" (119 mm x 87.5 mm x 13.9 mm)
Landscape: 3 7/16" x 4 11/16" x 9/16" (87.5 mm x 119 mm x 13.9 mm)
Mount onto standard 1 gang US, UK, or EU back boxes
Weight: Approximately 0.25 lb (0.11 kg)
Front Panel Components: 6 buttons
Colors/Styles Available: • Portrait, Black: MCP-106P-BL (FG2102-06P-B)
• Portrait, White: MCP-106P-WH (FG2102-06P-W)
• Landscape, Black: MCP-106L-BL (FG2102-06L-B)
• Landscape, White: MCP-106L-WH (FG2102-06L-W)
Active Power Requirements:
Voltage, DC (Typical): PoE (37V-57V)
Voltage DC Range: 37V-57V per 802.3af specification
Power Connector: (1) RJ-45 Ethernet
Power Supply:
External, Required: Any POE injector or switch, conforming to the 802.3af standard including AMX’s PS-POE-AF-TC (FG423-83),
not included
Environmental:
Temperature (Operating): 32º F to 104º F (0º C to 40º C)
Temperature (Storage): 14º F to 140º F (-10º C to 60º C)
Humidity (Operating): 5% to 85% RH
Ethernet:
Ethernet Connection: (1) 10/100; Port provides TCP/IP communication. This is an Auto MDI/MDI-X enabled port, which allows you
to use either straight-through or crossover Ethernet cables. The Ethernet Port LEDs show communication
activity, connection status, speeds, and mode information.
Control Ports and Indicators:
RS-232 Port: (1) 3-position 3.5mm Screw Terminal; 300 - 115,200 baud
IR/Serial Port: (1) 2-position 3.5mm Screw Terminal; IR Transmit / 1-way Serial ports
Support high-frequency carriers up to 1.142 MHz
Program Port: (1) USB Mini-B, USB
ID Pushbutton Reset factory settings, reset factory image, toggle between DHCP or static IP addressing mode
Memory:
Flash: 4 GB
Memory Card: 4 GB SD
DDRAM: 256 MB
Certifications: • FCC Class B
• CE EN 55022
•EN 55024
• IEC/EN-60950-1
•UL 60950-1