5. Diagnose
Select [Diagnose] in Main Menu and press [OK], the screen will display Monitor
Status interface as following figure 5-1:
Figure 5-1
5.1 OBDII/EOBD Diagnosing
This option presents a quick way to check for DTCs, isolate the cause of the
illuminated Malfunction Indicator Lamp (MIL), check monitor status prior to
emissions certification testing, verify repairs, and perform a number of other
services that are emission-related.
In Figure 5-1, press [OK] to enter system, the screen will automatically jump to
figure 5-2:
Figure 5-2
Press [OK], a screen similar to Figure 5-3 will appear:
To Next Page
Loading...
