Need help?Do you have a question about the ANDELI TIG-200 Series and is the answer not in the manual?
General and specific safety guidelines to prevent accidents and injuries during operation.
Discusses EMC interference and the importance of assessing the surrounding environment for potential disturbances.
Methods to minimize electromagnetic radiation emission, including proper installation and cable management.
Detailed specifications and parameters of the TIG welding machine, including voltage, current, and dimensions.
Guidelines for installing the welder in suitable environments and specifying input power source requirements.
Details on connecting the input power, including cable specifications and protection devices.
Explains the model naming convention and provides a diagram for understanding the model structure.
Illustrates the internal schematic of the welding machine and explains its working principle using IGBT inverter technology.
Introduces the front panel, its controls, and how to select functions and adjust parameters.
Explains the meaning of indicator lights and the process of storing and recalling welding parameters.
Details protected codes like OC, indicating overheat or overcurrent protection, and how to handle them.
Describes output interfaces and initial installation steps for connecting the welding machine.
Provides instructions and reference parameters for setting up and performing MMA, TIG, Cold, and Cleaning welding processes.
Highlights critical safety points, operational precautions, and warnings to ensure safe and proper machine usage.
Outlines regular maintenance tasks, cleaning procedures, and important considerations before performing any maintenance.
General| Frequency | 50/60 Hz |
|---|---|
| Efficiency | 85% |
| Insulation Class | F |
| Protection Class | IP21S |
| Welding Process | TIG (DC) |
| Input Voltage | 220V ±15% |
| Output Current Range | 10-200A |
| Rated Duty Cycle | 60% |
| Cooling Method | Fan Cooling |
To Next Page
