Anderic RRST01.2 User Manual

Anderic
®
RRST01.2 Advanced Universal
Operating Guide
Thank you for purchasing the Anderic RRST01.2 universal remote control. This remote is
programmed to work with Roku
®
Media Players and LG
®
/Vizio
®
TVs (for the keys: ‘Power,’ ‘Mute,’
‘Vol+/-’). This remote can be programmed to work any TV via the learning method. Please refer to
the “Learning Instructions” section for instructions, no codes needed. However, if you have a
Roku TV, you can program this remote work via the below table “Programming Codes for Roku
TVs.”
NOTE: This remote does not work for Roku Sticks
Downloadable (PDF) version of this manual is available at:
ANDERIC.COM/RRST01
Installing batteries and the wrist strap
Please see the diagram below.
1. Remove the battery cover.
2. Insert the batteries, as shown in the diagram below, matching polarities.
3. Loop the wrist strap around the screw hole and hold in place while
replacing the battery cover.

Anderic RRST01.2 Specifications

General

Type	Remote Control
Brand	Anderic
Model	RRST01.2
Category	Remote Control
Power Source	Battery
Battery Type	AAA
Number of Batteries	2
Infrared Frequency	38 kHz
Operating Range	Up to 10 meters

Summary

Installing Batteries and Wrist Strap

Battery and Strap Installation Steps

Steps to remove the battery cover, insert batteries with correct polarities, and attach the wrist strap.

Programming Codes for Roku TVs

Roku TV Programming Steps

Steps to program the remote for Roku TVs using brand-specific codes and key combinations.

Learning Instructions

Remote Learning Process

Detailed steps for programming the remote by learning signals from an original remote control.

Delete All Learned Keys

Key Deletion Procedure

Instructions to delete all learned keys by pressing and holding specific buttons.

Reset to Factory Default

Factory Reset Procedure

Procedure to reset the remote to its factory default settings by holding specific buttons.