Anderic RR1001S - User Manual

RR1001S User Manual
Note: The RR1001S is preprogrammed to control SAMSUNG TV.
Recommendation: Please visit our website for mobile & desktop versions of
this manual. We recommend downloading it to your mobile device or
bookmarking our URL so you have easy access to the manual when ever you
need help with your RR1001S remote. You can go to URL below or scan the
QR code below to go there directly.
http://www.anderic.com/rr1001s
Program - Code Input Method
1. Turn on TV manually.
2. Press and hold [SET] and [POWER] keys simultaneously for 3 seconds;
the indicator light shall remain on; then release the keys.
3. Enter the 4-digit code of your brand TV from the code list at end of this
manual. After a valid code entry, the indicator turns off. For an invalid
code, the indicator flashes 4 times quickly and exits setup mode.
NOTE: After entering code setup mode, if without pressing any button for 10

Summary

Program - Code Input Method

Turn on TV manually

Initiate the programming process by turning on the TV.

Press SET and POWER keys

Activate setup mode by holding SET and POWER keys for 3 seconds.

Enter 4-digit code

Input the specific 4-digit code for your TV brand to complete setup.

Program - Shortcut Key Method

Turn on TV manually

Start programming by powering on the TV.

Press SET and brand key

Hold SET and a brand key until the TV powers off to begin auto-search.

Automatic code search

The remote automatically searches for the correct code for your TV brand.

Program - Manual Code Search

Turn on TV

Ensure the TV is powered on before starting the search.

Press SET and CH+ keys

Hold SET and press CH+ for 5 seconds to enter manual search mode.

Cycle through codes

Use CH+ to advance or CH- to go back through codes, press SET to save.

Learning function

Enter learning mode

Press and hold SET and VOL+ for 5 seconds to enter learning mode.

Point and learn keys

Align remotes closely and press keys on the original remote to transfer codes.

Save learned codes

Hold SET and press VOL- to save learned codes and exit learning mode.

Code Identification

Activate identification mode

Press SET and POWER for 3 seconds, then input 990.

Count indicator flashes

Press each numbered key (1-4) and count the resulting indicator light flashes.

Factory Reset

Initiate reset sequence

Press SET and POWER for 3 seconds to prepare for reset.

Press CC key to reset

Press the CC key; the indicator light flashing 3 times confirms the reset.

Setting the Sleep Timer

Program remote for sleep function

Ensure the remote is programmed to your TV before setting the sleep timer.

Activate sleep timer

Press and hold SLEEP until the indicator blinks, then enter minutes (01-99).

Cancel sleep timer

To cancel, press and hold SLEEP or POWER for 3 seconds.

Setup Lock

Activate setup lock

Press SET and POWER for 3 seconds, then input code 9966.

Unlock the remote

Repeat the setup lock activation steps to unlock the remote.

Anderic RR1001S Specifications

General

Brand	Anderic
Model	RR1001S
Category	Remote Control
Language	English