Anderic RRST01.3 User Manual

Anderic
®
RRST01.3 Advanced Universal
Operating Guide
Thank you for purchasing the Anderic RRST01.3 universal remote control. This remote is
programmed to work with Roku
®
Media Players and LG
®
/Vizio
®
TVs (for the keys: ‘Power,’ ‘Mute,’
‘Vol+/-’). This remote can be programmed to work any TV via the learning method. Please refer to
the “Learning Instructions” section for instructions, no codes needed. However, if you have a
Roku TV, you can program this remote work via the below table “Programming Codes for Roku
TVs.”
NOTE: This remote does not work for Roku Sticks
Downloadable (PDF) version of this manual is available at:
ANDERIC.COM/RRST01
Installing batteries and the wrist strap
Please see the diagram below.
1. Remove the battery cover.
2. Insert the batteries, as shown in the diagram below, matching polarities.
3. Loop the wrist strap around the screw hole and hold in place while
replacing the battery cover.

Anderic RRST01.3 Specifications

General

Brand	Anderic
Model	RRST01.3
Category	Remote Control
Language	English

Summary

Installing Batteries and Wrist Strap

Programming Codes for Roku TVs

Learning Instructions

Remote Management and Accessories

Delete All Learned Keys

Procedure to delete all learned keys from the remote control for reset.

Reset to Factory Default Status

Instructions to reset the remote control to its original factory default settings.

Optional Cable Attachment

Information on an optional security cable for attaching the remote to surfaces.