Andrew ES76PK-1 User Manual

Andrew Corporation
10500 West 153rd Street
Orland Park, IL U.S.A. 60462
Telephone: 708-349-3300
FAX (U.S.A.): 1-800-349-5444
Internet: http://www.andrew.com
Customer Service, 24 hours: U.S.A. • Canada • Mexico: 1-800-255-1479
U.K.: 0800 250055 • Republic of Ireland: 1 800 535358
Other Europe: +44 1592 782612
16 August, 2005
Copyright © 2005 by Andrew Corporation
Installation, Operation and Maintenance
Bulletin OM76PK
Type ES76PK-1
7.6-Meter ESA
7.6-Meter Earth Station Antenna
Revision D
Notice
The installation, maintenance, or removal of antenna systems requires qualified, experienced personnel. Andrew installa-
tion instructions have been written for such personnel. Antenna systems should be inspected by qualified personnel to
verify proper installation, maintenance and condition of equipment.
Andrew Corporation disclaims any liability or responsibility for the results of improper or unsafe installation and mainte-
nance practices.
All designs, specifications, and availabilities of products and services presented in this manual are subject to change
without notice.

Andrew ES76PK-1 Specifications

General

Brand	Andrew
Model	ES76PK-1
Category	Antenna
Language	English

Summary

Introduction and Manual Guide

Introduction to 7.6-Meter Earth Station Antenna

Overview of the 7.6-Meter Earth Station Antenna's features and capabilities.

How to Use This Manual

Guidance on navigating the manual's structure, content, and sections.

Getting Started

Getting Started: Overview and Warnings

Essential preliminary information and critical safety guidelines for installation and operation.

Recommended Tools and Parts Verification

Lists recommended tools and procedures for verifying received parts.

Equipment Handling and Returns

Procedures for reporting damage and returning equipment.

Installation Procedures

Foundation and Base Assembly

Steps for preparing the foundation and installing the pedestal mount.

Component Installation Procedures

Instructions for installing jack arms, jackscrews, and reflector backstructure.

Reflector Alignment

Procedures for aligning the reflector using a theodolite and target screws.

Subreflector Installation

Steps for attaching and centering the subreflector assembly.

Operation and Maintenance

Satellite Acquisition Procedure

Steps for locating and peaking satellite signals using a spectrum analyzer.

Preventive Maintenance

Guidelines for cleaning, inspection, and general upkeep of the antenna.

Component Preservation and Lubrication

Instructions for preserving parts, including painting and lubrication procedures.

Lubrication Details

Charts and points for proper lubrication of antenna components.