Andrew Node G 938 User Manual

ID No: 7164491 Page 1
User’s Manual
for
Node G
Network Elements

Andrew Node G 938 Specifications

General

Uplink Gain	15 dB
Downlink Gain	15 dB
Output Power	33 dBm
VSWR	1.5:1
Power Supply	+24 VDC

Summary

1.2. HEALTH AND SAFETY WARNINGS

2. INTRODUCTION

2.1. PURPOSE

Explains the primary function of the Node G in enhancing mobile communication coverage and quality.

2.2. THE NODE G NETWORK ELEMENT

Describes the Node G as an intelligent, self-adaptive, and low-maintenance network enhancer.

2.3. QUICK START CHECKLIST

a. Required Equipment

c. Procedure

Outlines the sequential steps for correctly setting up and optimizing the Node G unit.

3. INSTALLATION

3.1. MECHANICAL INSTALLATION

Covers the physical mounting and installation procedures for the Node G unit.

3.1.1. General

3.1.2. Wall Mounting Procedure

3.1.3. Pole Mounting Procedure

3.2. ELECTRICAL INSTALLATION

3.2.1. General

3.2.2. Grounding

3.2.3. Power Connection

3.2.4. Connection of the Antenna Cables

4. FUNCTIONAL DESCRIPTION

4.1. DIGITAL ARCHITECTURE

4.2. FEATURES

4.2.2. Digital Interference Cancellation Equipment (ICE)

4.2.4. Voltage Standing Wave Ratio (VSWR)

4.2.5. Status Information

4.2.6. Alarm forwarding

4.3. COMPONENTS - MAIN AND EXTENSION UNIT

4.3.4. Digital Channel Module (DCM)

4.3.4.1. Establishing a Local Connection from Laptop or PC

4.3.7. External Alarm Controller - EAC-card

4.3.7.2. External Alarms

4.3.7.3. Summary Alarm

5. MAINTENANCE

5.1. GENERAL

5.2. REPLACEMENT OF COMPONENTS

Guidance on replacing Field Replaceable Units (FRUs) like power supply and battery pack.

5.2.1. Power Supply

5.2.2. Battery Pack

7. SPECIFICATIONS

7.1. MAIN UNIT

Detailed electrical, mechanical, and environmental specifications for the Node G Main Unit.

7.2. EXTENSION UNIT

8. PARTS LISTS

8.2. MAIN UNIT