To Next PageTo Next Page
Need help?Do you have a question about the andrews 62/341 and is the answer not in the manual?
Key information about the heater's design and safe usage.
Relevant standards for installation and safety compliance.
Compliance with UK health and safety legislation.
Information on the heater's resistance to Legionella bacteria.
Specifications and performance details for the Standard Range.
Specifications and performance details for the Hi-Flo Range.
Legal requirements and overview of the installation process.
Step-by-step guide for fitting the draught diverter.
Guidelines for selecting a suitable installation site.
Instructions for connecting the natural gas supply.
Wiring and connection details for auto ignition system.
Recommendations and standards for flue pipe installation.
Requirements for adequate air intake and ventilation.
Advice on water hardness and treatment for longevity.
Details on Hydrojet system and general water connections.
Installation specifics for standard range vented systems.
Installation and operation of optional anode protection.
Installation guidelines for unvented systems.
Installation specifics for Hi-Flo range vented systems.
Installation guidelines for Hi-Flo unvented systems.
Commissioning steps for standard range pilot models.
Commissioning steps for Hi-Flo range pilot models.
Commissioning steps for standard range auto ignition models.
Commissioning steps for Hi-Flo range auto ignition models.
Guidance for end-users on operation and safety.
Crucial safety warnings and precautions before operation.
Operational sequences for standard range models.
Operational sequences for Hi-Flo range models.
Operating sequences for auto ignition models.
Initial steps and safety before performing service.
Cleaning and checking the burner assembly for both ranges.
Maintenance and checks for the gas control valve.
Cleaning and inspection of flue ways for optimal performance.
Procedures for cleaning the tank and inspecting magnesium anodes.
Inspection and servicing of the safety valve.
Step-by-step guide for replacing the gas control valve.
Procedures for replacing pilot assembly components.
Instructions for removing and replacing the burner assembly.
Troubleshooting common issues for pilot models.
General faults applicable to all water heater models.
Troubleshooting specific issues for auto ignition models.
Troubleshooting guide for Correx anode system indicators.
Illustrated parts breakdown for standard models.
Illustrated parts breakdown for Hi-Flo models.
Parts and illustrations for unvented system kits.
Parts and illustrations for 24V auto system kits.
Additional details on Honeywell integrated controls for G Series.
Technical specifications for the water heater components.
Explanation of operational sequences and lockout states.
Visual guides for diagnosing operational faults.
Procedures for accessing and navigating service mode menus.
Explanations of error codes and how to view history.
Detailed service procedures for specific circuits and components.
General| Brand | andrews |
|---|---|
| Model | 62/341 |
| Category | Water Heater |
| Language | English |
