ANDYCINE A6 Max - Page 18

17
Lut Switch
OFF, ON
After the LUT Switch is turned on, you can use the Lut (SLOG2,
SLOG3, LOGC, VLOG).
Lut Table
Show the 4 built-in Lut and the custom load Lut
Lut Import (USB-
C)
After copying the 3D LUT file to the U disk and inserting it into the
TYPE-C to USB Connector, you can click the “<” or “>” key in the
Lut Import(USB-C) to import the 3D LUT file.
Color Temp.
5600, 6500, 9300, User
Under the User, the red, green and blue of the image can be
adjusted.
Red
0～255
Green
0～255
Blue
0～255
Backlight
0～100
Pic. Mode
Standard, Mild, User, Dynamic
Under the User, you can adjust the image Brightness, Contrast,
Saturation, and Sharpness.
Brightness
0～100
Contrast
10～100
Saturation
0～100
Sharpness
0～100
Tint
0～100

Left Right Key
Set
Volume, Backlight
You can set the Left Right Key Set as shortcut keys for volume or
backlight adjustment. After setting, when the menu is not