pop-up function items to select one of them, such as “Focus
Assist”. So when you exit menu, you could press F1 directly on
the front of panel to turn on “Focus Assist” function.
Same setting for F2
4. How to Load 3D LUT?
1. SD Card Format FAT32 and NTFS
2. Max Files Limit Maxium 50 Lut files
3. File Requirements The lut should in.cube Single file not exceeded to
7.9Mb Support LUT-3D-Size 16,17,32,33,64,65 The files should be valid
The files’ name should in English or Arabic Words
4. Steps and Instruction Make sure that the SD card correctly insert
Enter the Monitor Menu---“Color”---“Load Lut”
After this, the monitor will auto detect the sd card
A. There is no SD Card The screen will show failded,can try one more
time,if not work, restart the monitor
B. There is SD Card The monitor will erase the exits user’s lut fill and
show “Initializing” If there is no valid lut file in sd card, the lut will not
load.The monitor will show “clean up”
C. If there is valid lut file in sd card, the monitor will load lut files and
show “[n] name. The [n] shows the quantity number. The “name” should
in lut files’ name. If load successful, the screen will show “complete[n]”.
[n] Stands for the quantity number for lut files should under 50.
Firmware Updates (AndyOS)
To Next Page
Loading...