6. Trouble Shooting
6.1 Only black and white or monochrome picture:
① please check saturation, brightness & contrast adjustment.
② Please check "Monochrome" is in black, white or monochrome
image or other condition.
6.2
NO Image after put on the power
① Check if signal cable connecting is in good condition.
② Check signal cable connecting, and make sure to use the standard
adapter to connect the monitor. If power is supplied by battery,
please check if the battery is fully charged.
6.3 Earphone
No sound
Check if Volume control do not open, press the volume button, and
try to increase the volume.
If you have more questions, please contact us
Customer Support: cs@andycine.com
Sales Inquiry: sales@andycine.com
Website: www.andycine.com
Facebook/Youtube: @andycinegear
Instagram: @andycinegear
Twitter: @andycinegear
★ Please note: Specifications are subject to change without notice. All
information correct at time of publishing.
To Previous Page
Loading...