■ Important information - Safety precautions
- Equipment in this instruction manual is exclusively for coating purposes. Do not use for other purposes.
- Read and understand this instruction manual. The operator shall fully understand the requirements stated
within the instruction manual including important warnings, cautions, operation and correct handling.
- Incorrect operation or mishanding can cause serious bodily, death, fire or explostion.
●Safety precautions
- The safty precautions in this instruction manual describe the minimum necessary informetion . Be sure to
Follow national and local regulations on fire prevention, electricity and safety as well as your own
corporate regulations.
- Pay special attention to sections shown with the symbols below. The explanations of the symbols are as
follows.
Warning and caution
This symbol indicates that a potentially hazardous situation may result in
serious injury or death if not followed.
This symbol indicates that a potentially hazardous situation may result in
Minor or moderate injury or death if not followed.
Type of symbols
This symbol indicates you must use caution.
Explanation will be given near symbol.
This symbol indicates warning may cause physical harm.
Explanation will be given near symbol.
This symbol indicates recommendations or requirements.
Explanation will be given near symbol.
We shall not be responsible for any injury or damage caused by disregard of warnings,
cautions or instructions.
● Notes
This symbol indicates important information needed to achieve full performance and
function of the equipment.
This symbol indicates useful knowledge and advice.
※
To Next Page
