Need help?Do you have a question about the Animo CB 20W and is the answer not in the manual?
Explains the manual's role for qualified personnel regarding appliance installation, programming, and maintenance.
Defines the meaning of notice, caution, and warning symbols used throughout the manual for user safety.
Lists the ComBi-line coffeemaker models covered by this manual for user reference.
Defines the intended use of the appliance and manufacturer liabilities for misuse or unauthorized purposes.
Provides guidance on obtaining service, technical support, and understanding warranty conditions.
Lists the relevant EU directives that the appliance complies with for market access.
Outlines crucial safety rules for installing, using, and maintaining the appliance to prevent injury or damage.
Details safety measures during maintenance and troubleshooting, including professional repair requirements.
Describes safeguards like on/off switch, STOP button, swivel arm detection, and dry-boil protection.
Covers packing materials and proper disposal procedures for the appliance and its components.
Identifies and lists the main parts of the ComBi-line appliance with reference to a diagram.
Lists recommended scale remover and coffee fur remover products for appliance maintenance.
Advises on using specific ground coffee types and Animo basket filter paper for best results.
Instructions for carefully unpacking the appliance and verifying all accessories are present.
Guidelines for selecting a suitable location and preparing the installation site with necessary connections.
Details on connecting the appliance to water mains, treatment advice, and drainage setup.
Specifies voltage, frequency, and wiring instructions for connecting the appliance to the power supply.
Step-by-step guide to flush the flow water system before initial operation.
Instructions for flushing the hot water boiler system to prepare it for use.
Explains the function of each button on the operating panel, including selection, start, stop, and timer.
Steps to prepare the appliance for daily use, including plug connection and container setup.
Guidelines for brewing quality coffee, focusing on coffee grounds, filter, and cleanliness.
Basic instructions for cleaning the appliance exterior, connection lead, and container types.
Steps for removing coffee deposits from the inner pot and other parts using coffee fur remover.
Guide for disassembling and cleaning the tap components for optimal performance.
Procedure for safely removing, cleaning, and reassembling the gauge glass and its components.
Instructions on how to initiate and perform the descaling program for the coffee brewing system.
Instructions on how to initiate and perform the descaling program for the hot water system.
Lists the main categories and functions available within the operator menu for settings and maintenance.
Details on how to access the operator menu and the PIN entry process for authorized access.
Explains how to access and read various counters like coffee/day and total coffee made.
Describes how to read the flow counter indicating litres until the next descaling signal.
Step-by-step guide to initiate the descaling program for the coffee maker, including solution preparation.
Step-by-step guide to initiate the descaling program for the hot water system, including solution preparation.
How to set the appliance language, current time, and date.
Adjusting the water volume for brewing and selecting the display unit (litres, cup, jug).
Setting the volume for a single cup, from 100 to 500 ml.
Setting the volume for a jug, from 200 to 2500 ml.
Customizing the four selection buttons for specific brewing volumes in litres, cups, or jugs.
Option to disable the automatic switching on of the container heating.
Configuring the descale indicator based on water hardness and desired litre count.
Adjusting the volume for the first brew charge to prevent filter overflow.
Setting the time for dripping after brewing, based on coffee type and amount.
Choosing between Celsius (°C) and Fahrenheit (°F) for temperature display.
Option to replace the tap symbol with the current hot water temperature on the display.
Enabling an extended heating period at 97°C+ for better tea water quality.
Setting the descale indicator for the hot water system based on water hardness.
Lists possible causes and actions for coffee maker error messages like C2, C3, C4, C7, C8, C9.
Lists possible causes and actions for boiler error messages like B0, B1, B2, B3, B7, B8.
Lists possible causes and actions for hot water system temperature errors E0 and E1.
General| Brand | Animo |
|---|---|
| Model | CB 20W |
| Category | Coffee Maker |
| Language | English |
To Next Page