ComBi
line
03/04
93
Set the required number of litres and confirm your changes with
the START button or go back without making any changes
using the STOP button .
• Contact your local water company if you are
unsure about the hardness of your tap-water.
12.6 Load defaults (menu 5)
You can restore all the default settings except for the
language setting with this function. Please note: All settings
that you have changed in the operator menu will be lost.
Press the START button to load the default settings or
go back without making any changes by pressing the STOP
button .
Load defaults Fig. 41
To Next Page
Loading...
