Animo ComBi Series 2017 - Foreword

4
2017/05 Rev. 0.0
ComBi-Line
© 2017 Animo®
All rights reserved.
Nopartofthisdocumentmaybereproducedand/ormadepublicinprint,microlm,electronicmedia
or any other form without the manufacturer’s prior consent. This also applies to the corresponding
diagrams and/or charts.
FOREWORD
Purpose of this document
This document is intended to be used as a service appendix in addition to the user manual with which
authorised trained service personnel can install, program and maintain this machine.
• Authorised trained service personnel refers to persons who can install, program, maintain and
carry out repairs on the machine.
Most of the settings, including the product settings, are secured by a PIN code. This PIN code is
intended to prevent the user from accessing the service menu.
It is recommended to not leave this document with the user after installation and to change the
standard factory PIN code.
Allchaptersandsectionsarenumbered.Thevariousguresreferredtointhetextcanbefoundinthe
illustrations in the front of this booklet or with the subjects concerned.
Pictograms and symbols
NOTE
General instructions for: WARNING, CAUTION or NOTE.
CAUTION !
Warning of possible serious damage to the device or injury.
WARNING
Warning of electricity and/or electrical danger.
WARNING
Warning of electrostatic discharge (ESD) to electronics.
WARNING
Warning of serious crushing injury.