USB-C cables are sold separately. Use a 140W USB-C cable and 140W adapter for the best charging experience.
DC Recharging
Recharge your power station by connecting to a DC output port with the DC charging cable.
When your portable power station only has 1% battery remaining, the "Remaining Battery" indicator will flicker to remind you to recharge.
Powering Your Device
Power On/Off
Press the main power button for 3 seconds to turn your power station on or off.
When the "Remaining Battery" indicator shows on the LCD screen, your power station is ready to charge devices.
• When powered on, press the main power button to turn the screen on or off.
• The screen will automatically turn off after 15 seconds of lighting up. The auto-off time can be set in
the Anker app.
• The power station will power off automatically if the output buttons are turned off and no power loads
are detected for 2 hours. The standby duration can be set in the Anker app. We recommend not setting
this to "never," so that the product can shut down on its own and save power in a long-term unused
state.
AC Charging
Press the AC outlet button and connect your device with the AC output ports.
The AC outlets can intelligently identify whether a plug is inserted. This helps prevent power waste by automatically turning off the power station if no plug is
detected for more than 15 minutes.
To Next Page
Loading...
