9 Place rotor cover plate (Fig. 1-6) evenly.
The plate is facing up and aiming at the
protrusion of stuffing pump.
10 Place stuffing hopper (Fig.1-5). Turn it
counter-clockwisely and use a 115-130
hook wrench to tighten it.
11 Push the coupling (Fig. 1-3) up. Place
into the stuffing propeller then push
down the coupling to couple it. Be
sure to insert the transmitting key into
the indentation of coupling. Install the
stuffing stopper and tighten it..
12 Insert auxiliary propeller (Fig. 3-4) into
dough hopper (Fig. 3-2) and cover with
the lid (Fig. 3-5).
To Next Page