ANKO-OME-0005(A1)
33
12. TROUBLESHOOTING
1.
Machine does not
function.
a. Power switch is not on.
b. Wire on circuit board is
loose.
c. Circuit breaker or overload
breaker inside the electric
box is open.
d. Power source was
disconnected or fuse blown.
a. Check and turn power on.
b. Remove electric box cover and
check circuit board and repair.
c. Check circuit breaker and
overload protector switch
d. Connect power source or replace
fuse.
2.
Stuffing quantity
not uniform.
a. Stuffing is too dry, or
contains too much meat
tendon in.
b. Not enough stuffing in
hopper.
c. Stuffing was frozen and
then thawed to re-use.
a. Make stuffing more moist. If too
much meat tendon used,
remove stuffing funnel and
clean out stuffing pump.
b. Add stuffing into hopper.
Always keep at least 70% of
hopper full.
c. Use all of well-mixed stuffing at
one time.
To Next Page