What to do if my anko VC8273-L-9 does not switch on?
If your vacuum cleaner isn't turning on, first ensure that the power switch on the unit is set to ON by sliding the power switch forward. Then, check the connection to the mains power socket or charger jack to ensure good contact and that the battery is fully charged.
Why is the suction not strong on my anko VC8273-L-9?
There could be several reasons why the suction is weak. First, check if the brush head is correctly fitted to the main unit. Second, the dust cup might be full, so empty it. Finally, the filters may be blocked and need washing.
General| Model | VC8273-L-9 |
|---|---|
| Category | Vacuum Cleaner |
| Type | Upright |
| Voltage | 220-240V |
| Power | 2000W |
| Cord Length | 5 meters |
| Filter Type | HEPA |
| Noise Level | 78 dB |
| Dust Capacity | 2 liters |
Details the built-in crevice tool for dry vacuuming.
Instructions for attaching the rubber wiper for wet suction.
Guide to attaching the brush for general cleaning.
Procedure for emptying the dust cup.
Instructions for installing the wall mount bracket for storage.
To Next Page
