To Next PageTo Next PageWhy is the suction not strong on my anko SL163E Vacuum Cleaner?
If your anko Vacuum Cleaner's suction is not strong, try the following: * Clean the filters and empty the dust canister. * Check for any blockages and remove them. * Ensure that the suction relief valve on the hose handle is closed.
What to do if my anko Vacuum Cleaner is overheating and stopping?
If your anko Vacuum Cleaner is overheating or stopping, clean the filters, empty the dust canister, and check for any blockages. After unblocking, allow the vacuum to cool for about 1 hour before attempting to restart it.
How to fix a noisy anko SL163E?
If your anko Vacuum Cleaner is operating noisily, you can try the following: * Clean the filters and empty the dust canister. * Check for any partial blockages and unblock them.
What to do if the floor brush is hard to push on my anko Vacuum Cleaner?
If the floor brush on your anko Vacuum Cleaner is hard to push, avoid forcing it. Instead, lift the floor brush momentarily to allow air to flow into the vacuum, releasing the built-up suction pressure, and then continue vacuuming. Also, if using on a carpet, retract the floor head brush. You can also slide open the vacuum suction relief valve located on the hose handle to reduce suction to the floor head.
How to prevent static shock from my anko Vacuum Cleaner?
If static shock is a problem when using your anko Vacuum Cleaner, try wearing insulating footwear (such as rubber or leather soles) or increase the humidity/heat level in the surrounding environment, or both.
General| Brand | anko |
|---|---|
| Model | SL163E |
| Category | Vacuum Cleaner |
| Language | English |
Step-by-step guide for connecting the flexible hose to the vacuum cleaner body.
Instructions for safely detaching the flexible hose from the main unit.
Guidance on connecting the telescopic tube and cleaning attachments.
Instructions for regular cleaning of vacuum filters to maintain performance and prevent overheating.
Solutions for a noisy vacuum cleaner, focusing on filters and blockages.
Resolving low suction power issues by checking filters, canister, and relief valve.
Addressing overheating and automatic stopping by allowing the motor to cool.
Tips for managing a floor brush that is difficult to push, especially on carpets.
Understanding and managing static electricity discharge during vacuum operation.
