EasyManua.ls Logo

anko SL163E - Small Turbo Head Usage

anko SL163E
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 11 of 20
11 Small Turbo Head
IMPORTANT: Keep Fingers, Hair and all other body parts away from the head
/ rotary brush when in use as injury may occur
DO NOT use on pets or people.
The Small Turbo head has a rotary brush which can be
used for vacuuming difficult debris such as pet hair off
furniture and car seats etc.
To use, first switch off and unplug the vacuum cleaner,
then pull the Standard Floor Head off the end of the
telescopic tube and push the Small Turbo Head on.
Alternatively, the Small Turbo head can be fitted directly onto the end of the
hose handle.
Plug the vacuum cleaner back into the power point and switch on.
The air being sucked through the Turbo Floor Head will start the rotary brush
turning.
Then just vacuum the furniture as normal.
DO NOT TOUCH the rotary brush when spinning.
NOTE: Should there be a blockage in the Small Turbo head, switch off and
unplug the vacuum cleaner.
To access inside, unscrew the round nut and slide up
as far as possible.
Swing the top cover open and lift off.
Remove any debris or blockage with a pair of tweezers and then refit the cover
and tighten the round nut before plugging in the vacuum cleaner and turning
on.

Related product manuals